Tel: +86-18790690982 Email: mary@cortensteelsupplier.com

Fe510C2KI

Fe510C2K1 Atmospheric Corrosion Resistant Steel

Parameters
Grade: Fe510C2K1 Steel Plate
Standard: UNI
Specification:
Thickness: 4-200mm
Width: 1500-3000mm
Length: 3000-12000mm

Fe510C2K1 Introduction
As a structural weathering steel, Fe 510 C2K1 steels have a super property. Fe 510 C2K1 steel chemical composition can increase resistance to atmospheric corrosion compared to other steels. This is because it forms a protective layer on Fe 510 C2K1 steel surface under the influence of the weather.
Delivery Status for Fe510C2K1  steel are Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP), Electroslag Remelting Technical, HIC test.
Fe510C2K1 resists the corrosive effects of rain, snow, ice, fog, and other meteorological conditions. The surface of the metal Fe510C2K1 can form a coating of dark brown oxidation ,which inhibits deeper penetration, so Fe510C2K1  steel saves the cost of need for painting and costly rust-prevention maintenance over the years.

Fe510C2K1 Chemical Composition
Grade C Si Mn P S Cr N Cu CEV
Fe510C2K1 max 0.16 Max 0.5 0.5 - 1.5 max 0.035 Max 0.035 0.4 -0.8 max 0.009 0.25-0.55 Max 0.52
Note:
1. The steels may show a Ni content of max 0.65 %;
2. For long Fe 510 C2K1 steel, the P and S content can be 0.005% higher;
3. The Fe 510 C2K1 steel may contain max. 0.30 % Mo and max. 0.15 % Zr;
4. It is permissible to exceed the specified values provided that for each increase of 0.001 % N, the P max. content will be reduced by 0.005 %; the N content of the ladle analysis, however, shall not be more than 0.012 %;
5.The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0.020 % or if sufficient other N binding elements are present.

Fe510C2K1 Mechanical Property
Grade ReH - Minimum yield strength (MPa) Rm -Tensile strength (MPa) A - Minimum elongation Lo = 5,65 √ So (%)  A - Minimum elongation Lo = Lo = 80 mm (%) Temperature Notch impact test. Min. absorbed energy
Fe510C2K1 Nominal thickness (mm) Nominal thickness (mm) Nominal thickness (mm) Nominal thickness (mm)
Thick mm to 16 16-40 40-63 63-80 80-100 100-150 To 3 3-100 100-150 3-40 40-63 63-100 100-150 1.5 - 2 2-2.5 2.5-3 -20 27
Fe510C2K1 355 345 335 325 315 295 510-680 470-630 450-600 22 21 20 18 16 17 18 0 27

Fe510C2K1 Application
Fe 510 C2K1 steel is used for various types of welded, bolted and riveted constructions e.g. steel frame structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions.

Fe510C2K1 Service
Cutting, Painting, shot blast, and The third party inspection in DNV, BV, LR, GL, ABS, CCS , SGS, and others in super thick ship steel plate.
Anyang Jin Chao Yang Materials Co., Ltd is an outstanding exporter and stockist in china, especially in Atmospheric Corrosion Resistant Steel, also named weathering steel. We have a good relationship with top 100 steel mills in China. If you any need about Fe510C2K1 steel, whatever the specification, we also can meet your maximum request. If you need more details about production, packing and technology, please feel free to contact Jin Chao Yang sales-team. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.