Tel: +86-371-89953839 Email: info@cortensteelsupplier.com

SA871 Type III Gr.60

ASME SA871 Type III Grade 60 Weathering Resistant Steel

Parameters
Grade: ASME SA871 Type III Grade 60 Steel Plate
Standard: ASME
Specification:
Thickness: 6-420mm
Width: 1600-4200mm
Length: 6000-12000mm

ASME SA871 Type III Grade 60 Introduction
ASME SA871 Type III Grade 60 weather resistant steel plate is used in different weather atmosphere. With good anti-rust protection and welding ability, it is used in shipping container, support frame of outside building etc. Remarkably enhances the anticorrosive performance of the structural element, lengthens the structural element service life, and is used in manufacturing each kind of structural element, which was used under the atmospheric environment and the caustic gas, the liquid environment.
ASME SA871 Type III Grade 60 is a corrosion resistant steel, also can be called weathering resistant steel or atmosphere corrosion resistant steel. Exposed in the weather condition, the surface of ASME SA871 Type III Grade 60 steel can develop a layer patina, which can protects the steel from deep corrosion. ASME SA871 Type III Grade 60 steel is also a high strength low alloy steel, so it can used in higher strength and longer period cycle material conditions.
According to A6/A6M Standard requirement, structural steel impact test sampling method according to A673/673M. Steel should be used in fine grain production process.

ASME SA871 Type III Grade 60 Chemical Composition:
Grades C max Mn P max S max Si Ni Cr Cu V Mo Nb
SA871Type III Grade 60 0.15 0.80-1.35 0.04 0.05 0.15-0.40 0.25-0.50 0.40-0.70 0.20-0.50 0.01-0.10    

ASME SA871 Type III Grade 60 Mechanical Properties:
Grade Yield strength Min MPa Tensile strength Min MPa Elongation min
      200 mm 50 mm
SA871 Type III grade 60 415 520 16 18

ASME SA871 Type III Grade 60 Application
With good anti-rust protection and welding ability, it has wide applications in shipping container, support frame of outside building etc. Remarkably enhances the anti-corrosive performance of the structural element, lengthens the structural element service life, and is used in manufacturing each kind of structural element, which was used under the atmospheric envirenment and the caustic gas, the liquid envirenment. Also used in construction of tanks, containers, bridges, frame structures, vehicles, etc with the request of welded, bolted, etc.

ASME SA871 Type III Grade 60 Service
These plates are in a variety of sizes and thicknesses, and is available as ex–stock or directly shipped from the mill. As with all our steels, our plates come with mill test certification, stampings and fully traceable. We can arrange for a variety of tests to be performed on the material if specified.